TPL5010-Q1: Watchdog timer

Kuan Wei Chen (Kevin Chen)

Genius 9710 points

Part Number: TPL5010-Q1

Dear Team,

In order to continue the below thread so I post a thread here:

Base on the below setting I can monitor the 25MHz clock, right?

Kevin

over 4 years ago

0 Hao Z over 4 years ago

TI__Mastermind 18070 points

Hi Kevin,

I'm not sure I follow. How do you align the phase between 25MHz clock and WAKE signal? The distance between a DONE signal and a WAKE pulse rising edge needs to be within 20ms for a RSTn signal to be asserted. And by the way, you need a pullup resistor at pin RSTn.

Regards,

Hao

0 Hao Z over 4 years ago in reply to Hao Z

TI__Mastermind 18070 points

Hello Kevin,

Please close this ticket and open another one when you have feedback.

Regards,

Hao

Clock & timing

Clock & timing forum

TPL5010-Q1: Watchdog timer