• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 20 subscribers
  • Views 143 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMV112: can i put series resistor between EN and VDD

VAIBHAV RAJGURU
Prodigy 40 points
Part Number: LMV112

Dear Sir,

I am using LMV112 in project, application note show's EN1 and EN2 pin is connected to VDD.

so i am putting series resistor between EN and VDD & transistor for EN control will it work?

Regards,

Vaibhav Rajguru

  • 0
    TI__Intellectual 950 points

    Hello Vaibhav,

    What is the use case for the series resistor? How much of a voltage drop will be on it? The EN pins on the LMV112 should be connected to VDD but the spec for the Enable High Minimum Voltage is 1.2 V. You wouldn't want to use a resistor if it would seriously lower the voltage from the VDD value.

    Regards,

    Adam