HI team,
My customer is using the SN74SSTVF16859 now. We want to check whether the device has the data input slew rate requirement. From the datasheet below. It seems to need slew rate 0.5v/ns. Want to double check with you. Thanks.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
HI team,
My customer is using the SN74SSTVF16859 now. We want to check whether the device has the data input slew rate requirement. From the datasheet below. It seems to need slew rate 0.5v/ns. Want to double check with you. Thanks.
Hi Lane,
if the customer's frequency is 100khz, what's the slew rate requirement here? As you know the slew rate 0.5V/ns is too strict. Thanks.
Hi Frank,
I'm not an expert on this device, it is very old and was inherited from another group. I cannot comment on whether the device can support lower slew rates. However, in general, devices can support slower slew rates with some increased jitter.
Kind regards,
Lane