This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PLLATINUMSIM-SW: Lock time page settings are not clear

Part Number: PLLATINUMSIM-SW
Other Parts Discussed in Thread: LMX2592

Hi!

I'm using PLLatinum Sim to evaluate total lock time for LMX2592.
I use PLLSim in Advanced settings mode. On "Lock time" page there is a group "VCO Calibration Settings" which has a dropbox with values "Start Frequency", "VCO Calstart Frequency" etc. What does these values mean?
Right below this dropbox, there is an edit box with values that look like VCO cores' frequency ranges. Does these numbers really represent VCOs' freq ranges for LMX2592?
Does "Start Frequency" or "Calibration Start Frequency" really influence calibration time?