The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 21 subscribers
  • Views 541 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMK61E2EVM: TICS Pro - LMK61E0M EZ config device not found

Roy Chou1
Genius 15665 points
Part Number: LMK61E2EVM
Other Parts Discussed in Thread: LMK61E0M, LMK61E2, LMK61E07, LMK61E2-100M

Hi Team,

I use TICS Pro V1.7.0.0 for LMK61E2EVM board and I select device -> osc -> LMK61E0M. (Use mini USB-J1 to connect)

But when I click the "Find I2C Address", it always shows device not found.

Do you have any comment for this issue?

Regards,

Roy

  • 0
    TI__Expert 6140 points

    Hi Roy, 

    I would recommend using the LMK61E2 profile on TICSpro. 

    Secondly, which device are you trying to use? Please note LMK61E07, LMK61E2, and LMK61E2-100M  to name a few all use the same EVM but all have different pinouts. 

    Regards,Amin