Hi there,
I noticed that Fout and VCO core selection in the loop diagram (upper left of software window) impact the settling time. Should I set these according to what the start frequency or the final frequency is?
Thanks,
Drew
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi there,
I noticed that Fout and VCO core selection in the loop diagram (upper left of software window) impact the settling time. Should I set these according to what the start frequency or the final frequency is?
Thanks,
Drew
Drew,
These should be set according to the final frequency. It is the final VCO gain and calibration of the final core that will dominate the lock time.
Regards,
Dean