CDCE62002EVM: CAD model or mechanical drawing of a CDCE62002EVM

Eric Salvo

Prodigy 50 points

Part Number: CDCE62002EVM

Hi, I need a CAD model or drawing with dimensions and hole locations of a CDCE62002EVM. Thank you.

over 3 years ago

0 Adam Siismets over 3 years ago

TI__Intellectual 950 points

Hello Eric,

Please allow me to check with the team and make sure I am able to provide this for you.

Thank you for your patience,

Adam

0 Eric Salvo over 3 years ago in reply to Adam Siismets

Prodigy 50 points

Thank you. I appreciate you checking into this. The drawing would be very helpful.

0 Adam Siismets over 3 years ago in reply to Eric Salvo

TI__Intellectual 950 points

Hi there

Hopefully this fits what you need. Please let me know if you can't read any parts of the image. I'm not sure how our forums are going to compress the file.

Regards,

Adam

0 Eric Salvo over 3 years ago in reply to Adam Siismets

Prodigy 50 points

That did help, but what I really could use is the location of the 1/8" holes. I marked it as resolved too soon. Thanks again.

Clock & timing

Clock & timing forum

CDCE62002EVM: CAD model or mechanical drawing of a CDCE62002EVM