This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CDCE906-706PERFEVM: Clockpro issue & Hex file generation

Part Number: CDCE906-706PERFEVM
Other Parts Discussed in Thread: CDCE906, CLOCKPRO, CDCE6214

Customer is facing a problem that unable to generate hex file for CDCE906.

 They installed ClockPro software and want to generate a hex file for 6 channel outputs with 20Mhz frequency, if possible kindly generate this required hex file for CDCE906 and share.


They could not find CDCE906 in the part selection option in the ClockPro tool marked in Red color below, help to resolve this issue.

They do not have parallel cable, is it required for detecting the CDCE906 on the EVAL board ?



  • Hi Prahlad,

    The CDCE906 evaluation tools are very out dated and if possible, I'd recommend our newer clock generator CDCE6214.

    To evaluate the CDCE906 EVM, you do need a parallel cable, and the software is actually Pro-clock instead of clockpro

    It can be downloaded from the product page.