Other Parts Discussed in Thread: CDCLVP111-SP
Hi I would like to know how this issue was resolved
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Can you describe the problem you are facing and I can assist better here. What is your input format slew rate/frequency/swing?
I assume you do not meet the input requirements for the CDCM7005-SP and need a way to boost your input up.
Hi, we are facing the same issue as:
We have a lo voltage sinusoidal input and we need to buffer it to other components in a square wave like LVPECL or similar.
I saw that similar issue was resolved by email with kimberly
One option is to use the CDCLVP111-SP between the sinusoidal input and the CDCM7005-SP. You would need to evaluate this based on what your voltage swing is and frequency are, because the CDCVLP111-SP also has a minimum voltage swing requirement to meet.
The other option is to use some low noise amplifier to increase the signal swing and a diode/limiter to limit the voltage swing to form a clipped sine wave input.
I am not sure what Kimberlee decided to implement or what parts were selected.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.