LMK03328: Looking for Part 1 of the LMK03328 Video Series

Nathan Henault

Part Number: LMK03328

I am working with an LMK03328EVM board to get acquainted with the TICS Pro software before using it on a custom design. I have been following the LMK03328 Video Series, training.ti.com/lmk03328-evm-setup-and-programming-tics-pro-gui, but noticed that it only has Part 2 and Part 3. In Part 1 a Webench report is generated, and Part 2 frequently references this report. I was hoping to be directed to Part 1 of the video series or a document which covers this process so that I can better understand the report and how to generate it.

over 3 years ago

0 Hao Z over 3 years ago

TI__Mastermind 18070 points

Hi Nathan,

The webench no longer exists so the part 1 isn't helpful anymore. There's now a wizard in the LMK03328 Ticspro so you can start with that wizard for configuration.

Regards,
Hao

0 Nathan Henault over 3 years ago in reply to Hao Z

Prodigy 20 points

Hi Hao,

Thank you for directing me to that set of trainings. I will look through them and hopefully clear up my confusion.

Clock & timing

Clock & timing forum

LMK03328: Looking for Part 1 of the LMK03328 Video Series