This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC3643EVM: Board layout and schematics don't match

Part Number: ADC3643EVM

I have problem in components reference numbering in ADC3643EVM board. They are not matching schematics.

For example we wanted to connect FPGA_CLK for sampling clock. From schematics it can be understood that zero ohm resistor R37 should be placed to allow connection from FPGA_CLK from FMC connector. However we needed to place that resistor to R31 in the bottom side of board to get it working. They were also other components which did not match. 

Our board revision is DC104A.