This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AMC3306EVM: Actual value of load current from HLDO_OUT pin

Part Number: AMC3306EVM
Other Parts Discussed in Thread: AMC3306M25

Dear TI Team

The customer wants to use the AMC3306EVM to check the behavior when the HLDO_OUT pin is overloaded.
Checking the data sheet, it is stated that it can handle loads up to IH = 1mA as shown in the table below.

I want you to answer the following questions.

1. 1. The data sheet of AMC3306M25 (installed in AMC3306EVM) states that the external load should not be connected as shown below.
 Does this mean that a load of 1mA or more should not be connected?

2. Will it be damaged when a load of 1mA or more is applied?
(The rated current of the HLDO_OUT pin was not specified)

Best Regards,
Y.Ottey