Hello,
Please advise what is the baking conditions for the ADS4246.
When baking in reel packaging, what conditions should the customer have?
Thank you.
JH
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
Please advise what is the baking conditions for the ADS4246.
When baking in reel packaging, what conditions should the customer have?
Thank you.
JH
Hi JH,
the ADS4246 has the following conditions:
https://www.ti.com/product/ADS4246#order-quality
Level-3-260C-168 HR.
The customer can check with their PCB shop on conforming to the standard.
Thanks.
Hi Hsia,
Thanks for your reply.
Could you please provide specific baking conditions for ADS4246 reel packaging status?
Thanks a lot.
JH
Hi JH,
From our QE:
In production, the parts were baked at 150C/8hours before tape-n-reel and vacuum sealed.
If the parts have been exposed to floor life over 168hours before mounting on PCB, the parts need to be baked at either 150C/8hours or 125C/24hours before use per J-STD-020 standard.