• State TI Thinks Resolved
  • Locked Locked
  • Replies 7 replies
  • Answers 2 answers
  • Subscribers 46 subscribers
  • Views 175 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DDC264EVM: Communication with linux system

Michael Fang
Prodigy 10 points
Part Number: DDC264EVM
Other Parts Discussed in Thread: DDC264,

Hi we recently purchased the evaluation board and it's been working well. We were wondering if there are low-level libraries available for accessing the fgpa using a linux system. We don't need the GUI, etc. just to be able to make measurements. 

Thanks!

-Michael

  • 0
    TI__Genius 11550 points

    Hi Michael,

    Welcome to the E2E forum !!!

    Unfortunately, we do not have any Linux driver to interface to FPGA on the DDC264 EVM. Thanks for the interest in the device, and good to hear it is working well for you.

    Thanks

    -TC

  • 0 in reply to TCT
    Prodigy 10 points

    Thanks TC for the welcome and fast reply! Would you be able to inform me how the communication to FGPA happens? As in, what’s the protocol? Looking at a few of the past posts for similar requests of custom communication to the DDC264EVM, I came across documentations for using the packaged DLL code. Is it possible to share the lower level protocol for reading / writing from the FPGA?

    Regardless, ultimately, we’re looking to integrate DDC264 chips with the rest of our setup. Is there someone who we can work with towards that?

    Thanks again!

  • 0 in reply to Michael Fang
    TI__Genius 11550 points

    Hi Michael,

    We will reach out to you for further discussion. Thanks.

    Thanks

    -TC

  • 0 in reply to TCT
    Prodigy 10 points

    Looking forward to hearing from you soon. Thanks!

  • 0 in reply to TCT
    Prodigy 10 points

    Hi TC,

    As we're waiting to hear back regarding this particular problem, would it be possible for us to reach out to someone at TI with whom we can have a chat regarding solutions for integrable current-input ADC. If it is too difficult with the DDC264, we're happy to explore other solutions. 

    Thanks again for your help so far.

    Michael

  • 0 in reply to Michael Fang
    TI__Genius 11550 points

    Hi Michael,

    Sorry for the delay in the response. I have reached out to you with an email. 

    Edit: The email address is rejected and undeliverable. Can you please provide an email that I can reach out to you? You can sent the detail to ads129x-support@list.ti.com.

    Thanks

    -TC

  • 0 in reply to TCT
    TI__Genius 11550 points

    Hi Michael,

    We received your email regarding this E2E post, but we are still having issues sending you the email. Please see the error message below. Can you provide another email address that we can try?

    Your message wasn't delivered because the recipient's email provider rejected it.

    Thanks

    -TC