Hi, I am trying to communicate ADS1293 andRaspberry pi4 through SPI. am using registers to read/write of spi control registers.but am unable to get any output data from ECG ADS1293 board.
Please help me out sir.programming language is python3
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi, I am trying to communicate ADS1293 andRaspberry pi4 through SPI. am using registers to read/write of spi control registers.but am unable to get any output data from ECG ADS1293 board.
Please help me out sir.programming language is python3
Hi Sampoorna,
Welcome to the E2E forum !!!
I will not be able to help without any information on the issue. However, there is a lot of information on the E2E forum that you may find helpful. Please do a simple search on this E2E forum as there are many ADS1293 SPI communication topics. Please see the link below for a recent question on the SPI communication for ADS1293. You can also post it here if you have a specific question on the SPI communication.
Thanks
-TC