The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC38J84: Mystery around "alarm_sysref_sh"

Part Number: DAC38J84


Looking at the 0x6C register, I see that there is the "alarm_sysref_sh". The GUI states that :

But in the datasheet, it is marked as reserved : 

Is this a 'functioning' alarm? If so, what are CDRV_SER, OSTROBE, 4T?