Hi team,
As mentioned, could ADS7066 support 5 pcs in daisy chain mode?
Does the communication sequence used as follow? Each byte need a separate CS control signal?
Best Regards,
Will
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
As mentioned, could ADS7066 support 5 pcs in daisy chain mode?
Does the communication sequence used as follow? Each byte need a separate CS control signal?
Best Regards,
Will
Hi Will,
There is no upper limit on the number of ADS7066 devices that can be connected in daisy-chain. As long as the host can drive the SCLK to all the devices (fan out) the daisy chain will work.
Regards,
Rahul
hi Rahul,
Thanks for your feedback. Does my communication correct? Especially the CS control signal logic.
Best Regards,
Will
Hi Will,
For 5 devices in daisy chain, the CSn pin will need to be low for 120 SCLKs (24 SCLK x 5 devices).
Are you already evaluating the hardware or this is still in schematic design stage?
Regards,
Rahul