Due to the U.S. Thanksgiving holiday, please expect delayed responses during the week of 11/22.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1015: sampling time

Part Number: ADS1015

Hi team,

My customer operate ADS1015 in single-shot mode with single ended signals. 
For the part, is the sampling time 4us? When we sent the command for a single shot conversion, is the wait time for the conversion to be complete the following: 
Wait time = WakeUpTime (25us) + Sampling time + [Conversion time( 1/Data rate) + 10% ]
I want to measure that the sampling time is 4us on the device and I was thinking of measuring the time difference when the conversion command is issued to when the OS bit in the config register turns from 0 to 1 when read. The time difference will be the wait time and from that my customer can figure out the sampling time as they know the other time variables.