Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 45 subscribers
  • Views 192 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS8588S: How to interface microcontroller with ADC ?

Manoj H
Prodigy 20 points
Part Number: ADS8588S

Hello,

We have LPC1788 Microcontroller and want to interface with ADS8588S.

So how can we interface ?

And also we need help for sampling rate and digital data reading.

We welcome your suggestions if missing something.   

Thank you.

  • 0
    TI__Mastermind 39475 points

    Hi Manoj,

    ADS8588S supports standard parallel and serial interface, all information are covered in the ads8588s data sheet, also the EVM user guide is a good reference which includes a schematic for the EVM circuit board. I suggest you to check these two documentations firstly, and then let us know if you have questions.

    The real sampling rate is implemented by CONVSTA and CONVSTB signals, check the timing in Figure 1 - 6 in the data sheet for sampling and data reading.

    Regards,

    Dale

  • 0 in reply to Dale Li
    Prodigy 20 points

    Hi Dale,

    Thank you for your reply.

    There is no any document for " PHI Controller Board ", so we confused in connection of ADS8588 with Microcontroller.

    Regards,

    Manoj