TSC2004: Power-down mode

Kengo.Y

Guru 10735 points

Part Number: TSC2004
Other Parts Discussed in Thread: TSC2007

Hi team,

Tsc2004 has the power-down mode.
How to set the power-down mode?

And,

Does the power-down mode require SNSVDD=I/OVDD=VREF=to be 1.6V or less?
What happens when the voltage exceeds 1.6V?

Sincerely.
Kengo.

over 3 years ago

0 Arthur Brown over 3 years ago

TI__Mastermind 19435 points

Hi Kengo,

power-down is always enabled. you can however change the conditions when TSC2004 enters power-down with the PND0 bit.

Regards,

Arthur

0 Kengo.Y over 3 years ago in reply to Arthur Brown

Guru 10735 points

Hi Arthur,

Thank you for your reply.

How do I set the power-down mode to enter?

And, how should I set it so that PENIRQ does not move in power-down mode?

Sincerely.
Kengo.

+1 Arthur Brown over 3 years ago in reply to Kengo.Y

TI__Mastermind 19435 points

Hi Kengo,

I do not believe this functionality exists for TSC2004. TSC2007 however does have such a function.

Regards,

Arthur

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Data converters

Data converters forum

TSC2004: Power-down mode