• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 214 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1299EEGFE-PDK: ads1299eegfe-pdk inquiry

Ray Vincent Aranzaso
Genius 13515 points
Part Number: ADS1299EEGFE-PDK
Other Parts Discussed in Thread: ADS1299

Hi,

Good Day. I have a customer who is working with ADS1299EEGFE-PDK. Please see below his query for your reference. Thank you very much.

I'd like to inquire about ads1299eegfe-pdk data reading

Can I read data through libusb-win32? Will ads1299eegfe PDK actively send data information to the window? I only need to get 8 channels of data, but not through the software you gave me

Only 8 channels of original signal data are needed

Best Regards,

Ray Vincent

  • 0
    TI__Genius 11550 points

    Hi Ray,

    Thanks for the support.

    The ADS1299EEGFE-PDK uses the USBStyx protocol to communicate to the MMB0 board (DSP), which directly controls the ADS1299 device. The MMB0 will not actively send data information to the PC. Instead, the software GUI initiates all the control to MMB0, which will send the corresponding information back to the PC. Therefore, you will need to implement your own software and firmware for the PDK to meet your requirement. For your reference, all the software and firmware source code is available on the ADS1299EEGFE-PDK product page. However, we will not be able to support any changes to the software or firmware.

    Thanks

    -TC