This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1260: ADS1260 DRDY not getting low

Part Number: ADS1260

Hi,

   I am writing a driver for ADS1260. The register command reading and writing work correctly. However, after issuing "START" command, DRDY pin did not get into low level. 

Is there any reference code / suggestions for solving this problem ? I have been stuck in this problem for more than 2 weeks and checked every possible causes. Thanks a lot.

Regards,

Martin