Because of the Thanksgiving holiday in the U.S., TI E2E design support forum responses may be delayed the week of Nov. 21. Thank you for your patience.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC3683EVM: Documentation on register 0x1F

Part Number: ADC3683EVM
Other Parts Discussed in Thread: ADC3683


The datasheet of the device does not mention register 0x1F. With the EVM GUI, we can change

values in this register (e.g. 2x DCLK) however, and these changes do have an effect.

Can you supply the documentation of this register? We want to make sure it is correctly



Rob van der Meer

  • Hi Rob,

    The datasheet does not currently list this register, but, as you have observed from the GUI, you can write/read with some effect.

    For the moment, please do not write to this register as its power on status defaults to the nominal state.

    You can look at the ADC3643 register 0x1F for some reference, since the ADC3683 is part of the same family, and has similar functionality in terms of registers.

    Best Regards,