Other Parts Discussed in Thread: ADS124S08EVM
hi sir
Install the ADS125H02EVM, But system fail,
system is win 7
Please advise it.thanks
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
hi sir
Install the ADS125H02EVM, But system fail,
system is win 7
Please advise it.thanks
Hi Alex,
The primary support engineer is on vacation and I support you on his behalf.
Have you installed both Delta-Sigma ADC Evaluation software and the EVM device package? Have you seen any error during the installation? Did you try to uninstall or delete it then re-install the software? thanks.
Regards,
Dale
Hi Alex,
The driver should be installed once you install the EVM device package, did you install both software?
Regards,
Dale
Hi Alex,
You can reference this e2e post for some information on getting the DSEval software to work: https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/916611/ads124s08evm-adc-evaluation-software-not-working
Note that this e2e post references the ADS124S08EVM, but the same information is applicable to the ADS125H02EVM.
There is also information about how to manually setup the drivers, and how they should appear, in the DSEval User's Guide: https://www.ti.com/lit/ug/sbau260/sbau260.pdf?ts=1641230964247&ref_url=https%253A%252F%252Fwww.ti.com%252Ftool%252FADS125H02EVM
You will probably have to perform a clean install by first uninstalling the DSEval software and EVM device package, then reinstalling the DSEval software first and then installing the H02 EVM device package.
-Bryan