Part Number: TSW14J56EVM
We were doing data reading and FPGA programming using USB3.0 (J9) of
TSW14J56EVM model card. However, due to the broken port we mentioned, we
now want to do data reading and FPGA programming via internal JTAG
connectors. In our research, we learned that we can program FPGA with
FPGA jtag (J16) and read data with USB JTAG (J2). For this, by
examining the schematic circuit of the card, we learned that we need
to inactivate the USB port and activate the JTAG port by changing the
default ports of the internal jumpers (JP4-JP5-JP6 etc.). But since we
don't have any concrete data, we want your technical support before we
get the jtags and make the mentioned configurations. We found some
jtag cables, but we would be glad if you suggest or suggest that you
have used them before, or if you suggest technical service for the
jtag cables we have chosen.
Our chosen JTAG supporting Altera Arria V programming:
https://www.digikey.com/en/products/detail/terasic-inc/P0302/2003484
JTAG cable for cyusb3014-bzxc:
http://www.hitechglobal.com/DesignTools/Computex/ARM_JTAG_Emulator.htm
https://www.amazon.com/SETCTOP-J-Link-Emulator-Debugger-Programmer/dp/B081SFZFXR
