Hi,
I can't find any ADS1119 C code software. If exists, could you please share? I saw a BOOSTXL-ADS1119 example but, there is no source code anywhere.
Regards,
Ender
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I can't find any ADS1119 C code software. If exists, could you please share? I saw a BOOSTXL-ADS1119 example but, there is no source code anywhere.
Regards,
Ender
Hi Ender,
Welcome to the E2E forum! Unfortunately TI did not publish example code for the ADS1119 as it was considered a simple device to communicate and use. We do have example code for the ADS1x2C04 which has some similar functionality. However, the ADS1119 would require a modification to the .h file as the register set is significantly different. The ADS1119 only has one configuration register so the register read/write commands would differ. Otherwise the basic commands would be the same.
Take a look at the code linked to above. If you still have questions, feel free to ask them on this forum.
Best regards,
Bob B