Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Just want to confirm, can the AFE5808A be used with differential inputs (to INP/INN)? Is the single-ended mode (used on the evaluation board, for example) preferred?
No, you cannot use AFE5808A with differential input to INP and INM pins. The design is such that it does not allow signal on the INM pin. You have to use the single-ended mode only.
