• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 46 subscribers
  • Views 237 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AMC60304: IDAC MAXout

Bright Zhu
Intellectual 260 points
Part Number: AMC60304

Dears

I have a project for Optical module 400G QSFP-DD DR4

need One laser support 4-way output so i need Idac＞400mA. 

Can AMC60304 IDAC  two channels are combined into one channel, and the output reaches 400mA??

  • +1
    TI__Mastermind 18546 points

    Hi,

    For applications that require additional current greater than the current provided by a single channel, multiple
    IDACs can be used in parallel. Multiple IDAC channels can be shorted together to produce a current that is
    equal to the sum of the individual channels. Make sure that the connected channels are enabled and disabled
    simultaneously. Avoid scenarios where a single change channel is enabled or disabled. Also make sure that
    the current being sourced by both channels is approximately the same to allow for evenly distributed heat
    dissipation.

    Regards,

    AK