ADC32J45EVM: How to operate the ADC32J45EVM evaluation board with a TSW14J10EVM

Renan Santos Adriano

Mastermind 19620 points

Part Number: ADC32J45EVM
Other Parts Discussed in Thread: TSW14J50EVM

Hello Team,

Posting this on behalf of my customer:

I have a doubt about how to operate the ADC32J45EVM evaluation board.

I am trying to use the ADC32J45EVM evaluation board with a TSW14J10EVM evaluation board and the Xilinx Zynq ZC706 FPGA. I have tried following the steps described in the user guide for both boards. However, I have not been successful with the High-Speed Data Converter Pro GUI because this ADC is not recognized in the list of available ADCs (see attachments). Furthermore, the ADC32J45EVM user guide says ADC3000 GUI, which I cannot find.

Regards,

Renan

over 2 years ago

0 Rob Reeder over 2 years ago

TI__Mastermind 27420 points

Hi Renan,

Attached is the ADC3000 GUI.

Regards,

Rob

slac667d.zip

+1 Drew Pierpont over 2 years ago

TI__Intellectual 1180 points

Hi Renan,

Regarding your customer's issue, the ADC32J45EVM will not work with the TSW14J10EVM and Xilinx part because the TSW14J10EVM is intended to work with the TSW1400EVM, which does not support the device in question.

I would recommend the TSW14J50EVM from our end if you want to test the ADC32J45EVM with your setup. You can find information about it and order here:https://www.ti.com/tool/TSW14J50EVM?keyMatch=&tisearch=search-everything&usecase=hardware

Thanks,

Drew

0 Renan Santos Adriano over 2 years ago in reply to Drew Pierpont

TI__Mastermind 19620 points

Hello Drew,

Good day and thank you for this clarification,

Regards,

Renan

Data converters

Data converters forum

ADC32J45EVM: How to operate the ADC32J45EVM evaluation board with a TSW14J10EVM