ADC12DJ5200RFEVM: Revision B and C Board

Mark Philip Felipe

Genius 9705 points

Part Number: ADC12DJ5200RFEVM

Hi Team, seeking from some clarification.

We want to know the difference between Rev B & Rev C configuration\driver differences...

How are the configs different on Rev B & Rev C?

Was using Rev C with the capture board and had an issue with the ADC board (Rev C)

Could not connect to it while the USB connection seems to be recognized by the PC

Thank you.

-Mark

over 1 year ago

0 Drew Pierpont over 1 year ago

TI__Intellectual 1180 points

Hi Mark,

Thanks for reaching out. I'm going to look into this for you so I can get you the best information possible.

Regards,

Drew

0 Drew Pierpont over 1 year ago

TI__Intellectual 1180 points

Hi Mark,

I will refer you to a similar post you can find here. There is a .xml file attached to my colleague Rob's second reply. Farther down, he links to a download for FT_PROG, which you will use to load the xml file per the instructions. Make sure you disconnect all other USB peripherals so FT_PROG is not trying to program other connected devices.

Please resolve the thread if this helps.

Thanks,

Drew

Data converters

Data converters forum

ADC12DJ5200RFEVM: Revision B and C Board