• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 107 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC12DJ5200RF: extra lane

[FAE] Andrew Wang
Genius 10685 points
Part Number: ADC12DJ5200RF

Hi Team,

What is the main purpose of setting extra lane register?

Say a certain JMODE has been selected, what could be a scenario enable extra lane?

Thanks!

Andrew 

  • +1
    TI__Mastermind 18205 points

    Hi Andrew,

    This extra lane register is used to enable the JESD lanes 1-7. This would be required when operating in a JMODE that requires more than 1 lane.

    This can be used with test pattern to verify all lanes are setup correctly. This could also be used in addition with JCTRL Register (Address = 0x204) - bit 4: ALT_LANES to utilize lanes 4-7 rather than lanes 0-3, providing flexibility in routing constraints if necessary. Ultimately, this allows for an increased flexibility when using this part.

    Thanks