ADS1282: Amplitude of CLK input?

Stephen Karlsgodt

Part Number: ADS1282

If the ADS1282 is powered from 3.3V, what is the required amplitude of the CLK in. I will be using a 4.096MHz clock. I'm looking for a PLL to drive 3 of ADS1282 parts.

I can see on page 16 of the datasheet that the CLK pin input impedance is 55k ohms, but not other specs are given.

Thanks,

Steve

over 1 year ago

0 Tom Hendrick over 1 year ago

TI__Guru**** 168445 points

Hi Steve,

The amplitude of the CLK in would be governed by the Absolute Maximum Ratings section, table 5.1 on page 2 of the datasheet. Logic high and low levels are specified in the Digital I/O section on page 4.

0 Tom Hendrick over 1 year ago in reply to Tom Hendrick

TI__Guru**** 168445 points

Hi Steve,

I see that you were not happy with my answer to your query. Can I ask for specific details on why that is the case? The clock is one of the digital inputs and must be at 80% (minimum) of VDD to be considered valid. So, with your 3.3V supply. the clock input needs to be at least 2.64V to be valid.

Data converters

Data converters forum

ADS1282: Amplitude of CLK input?