ADC14155: Typical Mass of Component

BRANDON BURGETT

Part Number: ADC14155

Hello,

We are doing an analysis of or board assembly process to ensure we don't have parts dropping on the bottom side while the top goes through reflow. Is there a typical mass documented for the ADC14155 we can use to help perform that analysis.

Thanks,

Brandon

over 2 years ago

0 Chase W over 2 years ago

TI__Mastermind 20125 points

Hi Brandon, we are checking on this for you. Kindly await a response.

Regards, Chase

0 Drew Pierpont over 2 years ago

TI__Intellectual 1180 points

Hi Brandon,

Thank you for your patience. I have managed to find a quality report that seems to imply a mass of 145.529917 mg based on material analysis. Additionally, the MSL Classification Peak Reflow Temperature is noted as 260 degrees C.

We are still seeking even more expert information and will get back with some as soon as you can. In the meantime, is this helpful, or are there any other specific bits you might need?

Thanks,

Drew

0 Drew Pierpont over 2 years ago in reply to Drew Pierpont

TI__Intellectual 1180 points

Brandon, I have confirmed that the mass given is the correct value. Feel free to select 'Resolved' on my first comment to close the thread.

Thanks,

Drew

Data converters

Data converters forum

ADC14155: Typical Mass of Component