Hello,
I want to use ADS131E08EVM-PDK without MMB0 and to communicate with it using a STM32F7...
Is there any library or code c that I can use please, I didn't find to many resources in the internet.
Thanks in advance
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
I want to use ADS131E08EVM-PDK without MMB0 and to communicate with it using a STM32F7...
Is there any library or code c that I can use please, I didn't find to many resources in the internet.
Thanks in advance
Hello Asmae,
Welcome to our forum and thank you for your post!
The only source code that we have available is contained within the EVM software installation directory. If you navigate to C:\Program Files (x86)\ADS131E08EVM\source\firmware_src.zip, you'll find the firmware source code. Please note that this code is specific to our evaluation platform and is not intended to be used in any end equipment.
You can download the EVM software here:
https://www.ti.com/tool/ADS131E08EVM-PDK#order-start-development
Regards,
Ryan