Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 47 subscribers
  • Views 362 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC12J4000: Automatic gain control for Oscilloscope Front-end

Pabl Oliva
Prodigy 25 points
Part Number: ADC12J4000
Other Parts Discussed in Thread: TIDA-00826, LMH6401, ADC3662,

On the TIDA-00826 reference design, an LMH6401 is used on an automatic gain control (AGC) loop with ADC ADC12J4000. Why is this block necessary on an oscilloscope front-end stage? If I need less bandwidth, and I would like to use ADC3662 instead, is the automatic gain control (AGC) loop necessary?