This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC12J4000: Low phase noise clocking solution

Part Number: ADC12J4000
Other Parts Discussed in Thread: LMX2541, , LMK04828

Hi forum, we are planning to use the ADC12J4000 with a 4GHz clock from a LMX2541, as this LMX is available for purchase.

As we are integrating the ADC samples to raise very weak signals from the noise floor, what is the recommended clock solution/filtering?

We are currently looking at using a clock buffer (RF amp), band pass filter(BFCN-4100+) and balun (BD3150N50100AHF) to have sinusoidal clock.

The clock source for the LMX is a LMK04828.

Best regards,

Eirik Bjerkaker