This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BP-ADS7128: Failed to connect to MSP432E401Y device

Part Number: BP-ADS7128
Other Parts Discussed in Thread: MSP-EXP432E401Y, , UNIFLASH, MSP432E401Y

Hello,

I am having the same problem discussed in this thread: https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1095935/bp-ads7128-failed-to-communicate-using-the-gui/4070622?tisearch=e2e-sitesearch&keymatch=ads7128#4070622

I have an identical setup of parts: BP-ADS7128 module with MSP-EXP432E401Y launchpad board, connected to computer with USB cable via the "Debug port". I have moved JP6 to the indicated position in JP1 (5V-OTG) as mentioned in the initial setup.

The BP-ADS7128 is installed in the correct location on the launch pad board.

Reading the other thread, I understand there was some development ongoing to resolve this issue on your side. Has there been an update or resolution to this problem?

Regards,

Evan Moore