Hi Team,
I have a question about ADS58C48. Is it possible to sync two ADS58C48 similar as ADC10D1x00 and ADC12D1x00(RF) ?
Can you share some documents as a reference?
Thanks.
Regards,
Marvin
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
I have a question about ADS58C48. Is it possible to sync two ADS58C48 similar as ADC10D1x00 and ADC12D1x00(RF) ?
Can you share some documents as a reference?
Thanks.
Regards,
Marvin
Hi Marvin,
The ADS58C48 does not have a sync feature to synchronize the clock receiver/divider circuit inside the ADC. Therefore, it is possible that there will be a clock phase uncertainty between the operations of the two ADS58C48 and impact to complete syncrhonization. You will need to implement additional software algorithm post the ADC signal process to ensure the phase alignment and synchronization of two devices.
Hi Kang,
Thank you.
You will need to implement additional software algorithm post the ADC signal process to ensure the phase alignment and synchronization of two devices.
Is there a TI document that I can provide as a reference to the customer?
Regards,
Marvin