Other Parts Discussed in Thread: ADC122S051, ADC122S101
Hi team,
There is application that ADC122S021 is used with /CS pin low for continuous conversion, but can customer use /CS pin to reset ADC, i.e. to toggle /CS pin to start a fresh conversion?
If no, is there any other method to reset ADC122S021 (without power reset)?
If yes, how long is needed to pull /CS pin high to reset the ADC?
One more question, is effective sample rate always 1/16 of fsclk due to throughput is 16 SCLK cycles?
- ADC122S021 with 50-200ksps sample rate has fsclk specified at 0.8-3.2MHz - 16x times
- ADC122S051 with 200-500ksps sample rate has fclk specified at 3.2-8MHz - 16x times
- ADC122S101 with 500-1000ksps sample rate has fclk specified at 8-16MHz - 16x times