This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC3663: test pattern register

Part Number: ADC3663

hi, 

    According to table 8-22,need to set in  Ramp Pattern mode for 16-bit ADC.how to set REG0X14/15/16?

 1.  REG0x15[bit7-5]=010), chose Ramp Pattern mode;

  2.to set Ramp pattern for 16-bit ADC),   " 00100" should be sent to reg0x14[bit4-0]=00100, is it right?

  • Ken,

    Below are the registers to place this device into 16-bit ramp mode:

    0x14 0x04

    0x15 0x00

    0x16 0x44

    This sets the CUSTOM PAT [17:0] to value 0x4, the TEST PAT B to 0x2, and the TEST PAT A to 0x2, enabling ramp mode for both channels.

    Regards, Chase