This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLA2518: Missing GPIO clamp diode specification

Part Number: TLA2518
Other Parts Discussed in Thread: TLA2528,

l would like to know the exact specification of TLA2518 and TLA2528 IO pin clamp diodes in case of digital and analog.

Unforunately I did not find it in datasheets and manuals. The only available info is a drawing about diode:

NXP specifies this in K10 datasheet as IICDIO and IICAIO.

Microchip defines this as IK absolute clamp diode current.

Used references:

TLA2518 Small, 8-Channel, 12-Bit ADC with SPI Interface and GPIOs datasheet (Rev. B) (ti.com)

Solved: Re: GPIO protection - NXP Community

Kinetis K10: 100MHz Cortex-M4 up to 512KB Flash 144pin (nxp.com)

64-Pin, Low-Power, High-Performance Microcontrollers with XLP Technology Data Sheet (microchip.com)