• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 47 subscribers
  • Views 262 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE5816: AFE5816

Carlos Julian Martin
Prodigy 120 points
Part Number: AFE5816
Other Parts Discussed in Thread: AFE5808A

Hi,

It seems no data output format is specified in the datasheet. Are data in two-complement or offset-binary format? Other parts, like AFE5808A, allow the user to choose between both formats, buy it seems this capability has been remove in AFE5816. Datasheet only says that OFFSET_CHx field should be specified in two-complement, but does not give any other info about this topic.

Regards,
C.J. 

  • 0
    TI__Expert 4740 points

    Hi C.J., 

    We have received your request. Our expert is on leave and will be back by 4th Jan. We will respond by that date. Thanks for your patience. 

    Regards,

    Karthik

  • 0
    TI__Expert 6790 points

    Hi CJ,

    Apologies for the delay in response.

    The output format is in twos complement. 

    I am also not sure why they have removed this bit selection for output format. It used to be in ADC register 4 [3] in previous generation devices. I looked this bit in the datasheet of AFE5816 and found that it has been modified to always 0 (which corresponds to 2s complement). 

    You can try writing 1 on this bit and see if it still supports offset binary. 

    I hope I am able to address your concern regarding the output format.

    Thanks & regards,

    Abhishek