TSW1400EVM: Time Out Error

yuhyeon Han

Part Number: TSW1400EVM
Other Parts Discussed in Thread: ADC3442EVM,

I am trying to use tsw1400evm with ADC3442EVM. An error is occurring, so I am writing to get help.

1. Error message
2. A picture showing the connection of TSW1400EVM and ADC3442EVM
3. A picture of the sine signal and trigger signal being used

I upload the file together. can i know the solution?

0 Rob Reeder 1 month ago

Hi Yuhyeon,

Please set the power supply to the TSW1400EVM to 5V with 4A of current for this board only.

Then re-try the setup. Power everything down, including the SW and start over.

Thanks,

Rob

0 yuhyeon Han 1 month ago in reply to Rob Reeder

I am currently using the power line that came with the TSW1400EVM.
(You can see it in the second picture)

Can't we just use this line?

0 Rob Reeder 1 month ago in reply to yuhyeon Han

Hi Yuhyeon,

If you can guarantee this is providing 5V at 4A, then yes. If not, then use a different power supply please.

Thanks,

Rob

Data converters forum