ADC10D1000QML-SP: Differential RCLK input level

Hello,

I'm the customer.

By looking at the answer, I think that my question is not clear.

In the table, the only value is the typical value for differential. I need the minimum and the maximum differential values. Minimum value to be sure that the signal at the input of ADC is enough to trig the input and maximum to be sure ADC is not stressed (maximum could be from absolute max rating I guess).

Also, because input is differential, I need same informations about the common mode for the same reasons.

Regards

Hello,

Some update about that?

Regards

Hi Rob,

Thanks for the feedback. You said this is all you have, meaning you don't have a at least minimum value on the RCLK input? Typical value without tolerance or min / max doesn't give enough information.

Let's say, if I drive the input with 200 mVpp, is it OK? With 100 mVpp? Or is it OK with just 360 mVpp +/- 1 mV ?

I'm pretty sure (and I hope) that Texas Instrument have this kind of information about their components.

Regards

Hi Rob,

This is the OK for me.

So, we can close this post.

Regards

Matthieu B