ADS1260: temp sensor

Brian Wang0928

Part Number: ADS1260

Customer found an abnormal behavior on the register value of temperature sensor at 25degree ambient temp during operation. Here is reading value.

Temp value: -59.6degree

over 1 year ago

0 Dale Li over 1 year ago

TI__Mastermind 37955 points

Hi Brian,

Can you provide more information? Is the customer testing on their circuit board or EVM? What's their ADC/register configuration? Is the 14000 RAW data they measured for temperature sensor?

Best regards,

Dale

0 Brian Wang0928 over 1 year ago in reply to Dale Li

TI__Genius 12400 points

Hi Dale, thanks. Since customer connecting bias power of ADS1260 to 3.3V power on AVDD, it would violate the d/s condition. We're just wondering to know if it would cause this fault. In the meantime, we're still asking customer to do the test with 5V power.

+1 Dale Li over 1 year ago in reply to Brian Wang0928

TI__Mastermind 37955 points

Hi Brian,

Violating the datasheet can definitely lead to a wrong result. Once you are able to provide more information, I can help the customer identify it.

Regards,

Dale

0 Dale Li over 1 year ago in reply to Dale Li

TI__Mastermind 37955 points

Started our communication offline, so closed this thread on the E2E forum.

Data converters

Data converters forum

ADS1260: temp sensor