Other Parts Discussed in Thread: TSC2008,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The customer queries on the TSC2008 are the following .
1. What is the active current with the touch being used and what is the standby current ?
Answer:
Please refere to below table for currents .
When the panel is not pressed, device consumes a power down supply current which is <5.5ua.
On touching the panel the current depends on the sampling rate as shown in table.
2. Could you specify the touch sensitivity parameter ?
Answer:
Can you please specify what exactly we mean by touch sensitivity oarameter?
3. The customer needs the calibration procedure for the part ?
Please refer to document below:
--------------------------------------------------------------------------------------------------------------------
The customer queries on TSC2046 are the following .
1. What is the active current with the touch being used and what is the standby current ?
2. Could you specify the touch sensitivity parameter ?
3. The customer needs the calibration procedure for the part ?
4. ESD level data of the part
Answer:
Shall internally check
5. Thermal resistance/impedance not mentioned in the datasheet ?
Answer:
Shall check