• State TI Thinks Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 246 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS54J60EVM: ADS54J60EVM GUI VALUES

shambhuling d
Prodigy 80 points
Part Number: ADS54J60EVM
Other Parts Discussed in Thread: LMK04828, ADS54J60

Dear TI Rep,

   We have purchased ADS54J60EVM board and want to interface with Xilinx ZC-706 demo board. So, in this regard we have downloaded the ADS54J60EVM GUI. Please guide us for LMFS=4244 mode configuration. We need your help for adc and lmk device parameters to be set in GUI.

Regards,

Shambhuling D

(Manager,D&E/MS)

  • 0
    TI__Guru* 91947 points

    Shambhuling,

    After loading the LMK04828 with the desired configuration file, press the ADC reset on the EVM, then using the GUI Low Level View tab, load the following config file: 

    "ADS54J60_LMF_4244.cfg".

    This will configure the ADC for 4244 mode with K set to 16. 

    In the LMK04828 Clock Outputs tab, you may have to adjust the DCLK divider of the reference clock used by the ZC-706 from the default value selected by the GUI. You may also need to change the SYSREF divider, which is located in the LMK04828 SYSREF and SYNC tab.

    Regards,

    Jim

  • 0 in reply to jim s
    Prodigy 80 points

    i don't find the link for downloading cfg file. Please share the link.

  • 0 in reply to shambhuling d
    TI__Genius 15321 points

    Hi Shambhuling,

    You mentioned that you installed the ADS54J60EVM GUI. When running the GUI, under the 'Low Level View' tab you should see a 'Load Config' button. Click this button and it will show the folder path that contains the .cfg files on your PC. 

    Additionally, this is generally in the C drive -> Program Files (x86) -> Texas Instruments -> ADS54Jxx EVM GUI -> Configuration Files

    Hope this helps. 

    Regards, Amy