I have one Question. I am using CMOS ouput.
Look at the picture.
Yellow is PHIA1, Blue is SH2 (ADCCLK) , Red is DOUT4, Green is DOUT7.
CIS SP(Start Pulse) is PHIB1, CIS CLK is PHIA1.
[Page 8, ADDR 0x00, [6] Bit is 0] , [Page 8, ADDR 0x01, [6] Bit is 0]
This picture is PHIA1(Yellow) ,B1(no measure) off.
Is it normal to output from DOUT at this time?
All channels in DOUT come out the same.
I think it's normal that there is no output.
Please give me an answer.
Bset regard
SeongHyu Shin.