Hi ,
Can someone please share the full schematic of the BOOSTXL-ADS7142-Q1?
I found only one page of schematic that too not very clear in the user guide of the evm.
Regards,
Shruti Gupta
Hey Tom , thanks for sharing the document , I suppose this is the latest schematic that you have , referring to the same , in this ADC the i2c address (device address) is configured by a resistive divider according to the resistance values , there's a table given in the datasheet for the same , in the schematic , both the resistances are populated and having the value of 100kohms , for these values there's no such combination given in the table (in the datasheet) , am I missing something here , what i2c address to be used for this ADC ? I am trying to integrate this adc with Sitara am64x processor , the slave address I am using here is 0x18 , but the processor is not acknowledging the ADC , the previous schematic I was referring to had both the resistors as DNP hence did use the 0x18 as address.
I am attaching both the pictures here , could you please clarify this 
