ADS131E08: Please help check the X-ray inconsistent between different batch and advise

Alfred Hu

Part Number: ADS131E08

The internal leadframe pattern between our provide parts (D/C:2316) and customer reference parts (D/C:2315) has little inconsistent (see the picture -parts corner with red circle area）, we replied that this maybe caused by different leadframe supplier or batches, and will not affect the quality of parts. And customer still want to get the official reply from TI. Please help check and advise. X-ray inconsistent on different batches

over 1 year ago

0 Dale Li over 1 year ago

TI__Mastermind 37955 points

Hi Alfred,

You are an electric component reseller, so you should check with the distributor where you bought this product. It should not be a problem or concern as long as you bought it from a TI's authorized distributor.

Regards,

Dale

0 Alfred Hu over 1 year ago in reply to Dale Li

Prodigy 30 points

Hello Dale,

Thanks for your advise. We usually bought TI parts from TI's authorized distributor, due to this is an urgent case, firstly we checked with distributor and feedback no stock. Then we bought the part from a longtime supplier. Would you please help confirm if it is normal -different leadframe patterns between different batches? Please help advise.

0 Dale Li over 1 year ago in reply to Alfred Hu

TI__Mastermind 37955 points

Hi Alfred,

I suggest you to contact the authorized distributor.

Regards,

Dale

Data converters

Data converters forum

ADS131E08: Please help check the X-ray inconsistent between different batch and advise